How to add a subwoofer to your speakers
If your speakers sound thin, or films lack weight, a subwoofer is often the biggest single upgrade you can make. It is also the easiest to get wrong. Here is how to choose one, connect it, place it and set it up so the bass blends in instead of booming.
Why add a subwoofer?
Most bookshelf and many tower speakers run out of breath in the deepest bass. A subwoofer takes those low notes off them, so the main speakers play voices and instruments more cleanly and can go louder without strain. It also adds the weight you feel in film soundtracks, drums and bass lines.
If you are deciding between bigger speakers and a subwoofer, the subwoofer usually helps more. We explain why in bookshelf vs tower speakers.
1. Active or passive?
Every subwoofer needs an amplifier. The question is where it sits.
- Active (powered) subwoofer: the amplifier is built in. It connects with a single signal cable and a power plug, and has its own volume, crossover and phase controls. This is the simplest choice for most homes.
- Passive subwoofer: no amplifier inside. You drive it from a separate amplifier or a spare amplifier channel. It suits systems that already have a power amplifier or DSP amplifier with a channel free.
Our ES-S subwoofer boxes come both ways: passive, or with a built-in mono amplifier that has volume, crossover and phase controls on the back.
2. Which size for your room?
Bigger rooms need more air moved to fill them with bass. As a guide:
| Room size | Subwoofer | Our box (enclosure) |
|---|---|---|
| Up to 150 sq ft | 8 or 10-inch | ES-S8 ₹7,000 · ES-S10 ₹15,000 |
| 150–300 sq ft | 10 or 12-inch | ES-S10 ₹15,000 · ES-S12 ₹25,000 |
| Above 300 sq ft | 12-inch, or two subwoofers | ES-S12 ₹25,000 each |
Prices are for our standard handmade enclosures. The built-in amplifier adds ₹6,000, and the subwoofer driver you choose is priced separately in your quote. For the deepest, cleanest bass we can also build a tuned-dimension box sized for your exact driver after measuring it; that is quoted once we have the driver.
3. How to connect it
How you connect depends on what drives your main speakers.
- AV receiver or home theatre amplifier: run one cable from the receiver's subwoofer (LFE or "sub out") socket to the subwoofer's input. Then set the main speakers to "small" in the receiver's menu, so it sends their deep bass to the subwoofer.
- Stereo amplifier with a sub or pre-out: use that output in the same way, and set the crossover on the subwoofer.
- Stereo amplifier without a sub output: many powered subwoofers can take a speaker-level signal from the amplifier's speaker terminals. Check the subwoofer's inputs before you buy.
- Speakers with a built-in amplifier: look for a sub output on the speakers or on your streamer. If there is none, plan the system with an amplifier or DSP that has one.
- Passive subwoofer: it needs its own amplifier channel. Our 4-channel power amplifier can run two pairs of speakers or a bridged subwoofer.
4. Where to put it
Placement changes subwoofer bass more than almost anything else, because the room itself boosts some low notes and cancels others.
- Start near the front, beside or between your main speakers, so the bass seems to come from the same place as the sound.
- Corners give more bass but more boom. If a corner sounds heavy and one-note, move it out a little.
- Try the "crawl" test: put the subwoofer at your seat, play a track with steady bass, and walk around the front of the room. Where the bass sounds smoothest is where the subwoofer should go.
- Keep it out of a closed cupboard or a tight TV unit cavity, where it can rattle and sound boxy.
Shape helps too. Our boxes come front-firing, down-firing for even bass across the floor, slim L-shaped to tuck beside a sofa, or in a custom shape. Try our free room planner to see where everything goes.
5. Set the crossover, level and phase
- Crossover: this is the point where the main speakers hand over to the subwoofer. Around 80 Hz is a sensible start for most home speakers. Set it a little higher for small speakers and a little lower for large towers.
- Level: turn the subwoofer up until the bass sounds full, then back it off a touch. You should miss it when it is off, but not notice it as a separate box when it is on.
- Phase: sit in your usual seat and try both settings. Keep the one where the bass sounds louder and tighter around the crossover point.
Rooms still cause peaks and dips that knobs cannot fix. A DSP amplifier lets us set EQ, delay, crossover and level for each channel, so the subwoofer blends with your speakers at every seat. When we install a system, we set these up and measure them in your room.
Common mistakes
- Turning the subwoofer up too far, so it booms and draws attention to itself.
- Leaving the main speakers set to "large" on a receiver, so they still struggle with deep bass.
- Putting the subwoofer wherever it fits, without trying a few spots.
- Choosing a subwoofer far too small, or far too big, for the room.
Adding bass to a car instead? Read our car subwoofer box guide. For other ways to improve your system, see how to upgrade your speakers.
Questions
Can I add a subwoofer to any speakers?
Yes, as long as there is a way to send it a signal: a subwoofer output on your receiver or amplifier, a speaker-level input on the subwoofer, or a separate amplifier for a passive subwoofer.
Do I need an amplifier for a subwoofer?
Yes. An active subwoofer has one built in. A passive subwoofer needs a separate amplifier or a spare amplifier channel.
What size subwoofer do I need?
As a guide: 8–10 inch for rooms up to 150 sq ft, 10–12 inch for 150–300 sq ft, and 12-inch or two subwoofers above 300 sq ft.
Where should I put my subwoofer?
Start near the front, beside or between your main speakers. Avoid closed cupboards, and if a corner sounds boomy, move it out. The crawl test helps you find the smoothest spot.
What crossover should I set for my subwoofer?
Around 80 Hz is a good starting point for most home speakers. Go a little higher for small speakers and a little lower for large towers, then adjust by ear or with measurements.
How much do your subwoofer boxes cost?
Our ES-S subwoofer enclosures are ₹7,000 (8-inch), ₹15,000 (10-inch) and ₹25,000 (12-inch). A built-in amplifier adds ₹6,000. The subwoofer driver is priced separately.
Want bass that blends in?
Tell us your speakers, your amplifier and your room size. We suggest the right subwoofer and box and give you a fixed price on WhatsApp.